Operation instruction
1) When twist the botton to "Ⅰ" , the indicator is on and pump starts to affuse water into tank, slightly noice would be made when the water pump is being run, when the water reachs preset value, the pump will stop working automatically, the sound disappear and the whole injection time would be about 110 seconds. At this moment the button can be twisted to "Ⅱ", now heating pipe starts to work , water in tank start becoming hotter and hotter, when water temperatures reaches preset temperature(when pressure gauge shows 1Bar), heating pipe will automatically stop working, now it presents machine can normally be used.
2) for the first time use, tank and inlet/outlet water pipe may have little dust, you can let the machine work for 0.5 hour in advance, and then use the continous letting out the water and steam valve function for several times to ensure the water is clean;
3 While the machine is working, when using the steam valve, please do not touch its metal parts to prevent yourself from scald.
4 if you notice that product be damaged or abnormal phenomenon appeares, please stop using it and disconnect power supply as wel as water supply, then please turn to professional technology personnel for maintenance.
5 For safety, young person or people without any training are not allowed to use this machine.
6 high temperature and high pressure are characteristics of this electrical product, please disconnect power if no people around or not use it for a long time.
7. To check the working state of power cable timely, if notice the cable crazing, aging or overheating, please asked the authorized techical person to replace it with a new one.
8. This product can not be cleaned by flushing water directly.
9 In order to ensure machine’s life-span, please make sure to load filters to reduce fouling or jam of the water tank and the water pipe.
